A little late (sorry), but we are proud to announce two new international dealers: Escape from Noise in Sweden and Rhythm Active in Australia. Check them out, as they carry many excellent products from a lot of other manufacturers as well!
Sorry everyone, but it looks like I have to take some time off this week due to an ear infection. I’ll be back to work as soon as possible.
1/4″ jacks are back in stock for those buying Barebones Packs for 5U and other 1/4″ systems.
Got some really nice ones this time around: Switchcraft 112A mono NC-switched Hi-D enclosed jacks, but with all metal components gold-plated (not including panel nut or washer though).
Other than that, we’re just busy as hell filling dealer and individual orders, hence all the silence. But please, do not hesitate to contact us with any questions!
~flight
Hi!
Sorry (once again) for the long silence, but we’ve been busy with a lot of dealer orders. The bulk of them have been finished and shipped, so you should see f(h) modules showing up on their shelves very soon, including the new POWER and V’Amp modules.
Other good news: Joysticks are finally back in stock, so the Choices module is once again available and is also on its way to dealers.
There have also been quite a few changes to this website, including a shopping cart so you can order direct from us. We’re still trying to figure out how to best use the cart, so there will be some changes made from time to time, but it works quite well. If you are interested in something that is out of stock, just let us know! We can always put an item together for you.
Okay, back to the bench. Thanks for supporting us!
I had a wonderful dream.
It was in a medieval setting and I was engaged in battle. I threw my sword down after beheading my opponent, irritated with the repetitive, cyclic slaughter, and went to join my friends who were lounging by a dried-up stream bed. We all wore pure white robes over our black and bloodied leathers and armor. Sitting down, I looked across to the other bank and saw my sister kneeling by the empty river with an empty silver and gold chalice in her hand. As she looked at me, I saw she had gone utterly insane. She laughed, asking if it was time yet; If the time had finally come when we could cheat eternity and rise beyond. She raised a handful of snow from the bank and dropped it in the chalice (for the wine was all gone), then brought the chalice to her laughing lips to drink from it. She drank deeply, then lowered the cup again. Blood was running down her chin and her mouth was ringed in crimson as she screamed laughter, and the snow in the chalice was swiftly devoured in a rising pool of blood.
Then I thought and asked aloud: “But what about our clothes? Once we go beyond eternity, how will we get out the wine stains?” I looked to my left shoulder and saw purple stains on my white robe, then thought, “We should have thought of this sooner. There’s always one more fucking thing, isn’t there?” Then I woke up.
Greetings to all once again!
We’ve been pretty busy lately; mostly with re-structuring the business and a lot of work on the website, but also with two new eurorack modules: V’Amp and POWER.
The V’Amp (8 h.p., US$125.00) is a combination voltage-controlled amplifier (VCA) and ring modulator in one device, with the ability to smoothly change from VCA, to ring mod, then to inverting VCA, with one knob.
V’Amp page: http://m5m.830.myftpupload.com/product-lines/vamp/
V’Amp Barebones Pack (VBP): US$70.00. PCB dimensions: 78mm x 39mm/3” x 1.5”
POWER (US$85.00) is a ±12V 1A power supply in a 10hp eurorack format, is 40mm deep, and is intended mainly for shallow or portable systems, but works just fine for permanent setups. The POWER module includes a 12VAC output wall adapter – keeping the transformer outside of the case helps to keep down hum and magnetically coupled noise – but can be purchased without the adapter for US$75.00. A ±15V 1A option will also be available upon request.
POWER Barebones Pack (PWBP): US$55.00, US$45.00 without adapter The POWER Barebones Pack was designed for easy installation into any project: the AC input, power switch, and LEDs can all be remotely located, and all components and headers are on one side. PCB dimensions: 104mm x 89mm/4.10” x 1.93”
POWER page: http://m5m.830.myftpupload.com/product-lines/power/
POWER images: http://www.muffwiggler.com/forum/viewtopic.php?t=19710&postdays=0&postorder=asc&start=0
And it is also fundraising time: Now accepting orders for pre-release V’Amp and POWER modules. The delivery time is 1-3 weeks. In this case, “pre-release” means I just haven’t had time to work on the manuals or packaging yet. Manuals will be available for download from the respective product page once they are completed.
As for the website, Sonja has been doing a lot of work making it more useful and we now have PayPal buttons for in-stock products. There are more changes to come – as soon as we find a good back-end structure that works well – including forums, embedded Soundcloud clips, and other goodies.
We are now accepting orders directly, both U.S.A. and International.
Oh yeah: Stickers. You keep asking for ‘em, so we’re looking into getting some made. If you have an idea for an f(h) sticker that just HAS to be done, let us know!
Unfortunately there were some issues with the web update which will have to be resolved at a later time. For now though the website is back up and running as usual.
Hi!
Look at me – I’m back online! What a freaking miracle.
It seems like everything exploded at the same time, but it all seems to finally be working again. The computer crash was relatively simple (a bad sector in the hard drive, right where the registry is stored), so that didn’t take too long, but then my email hosting service (GoDaddy) went screwy. It took a week to figure out how to fix it. During which, all of the email stored on my server was deleted, so let me know if you don’t hear a response in the next day or two.
Whee! My computer just completely borked itself the other day somehow, so I’m currently running on very limited internet access. Hope to have that taken care of in a day or two.
But Good News! The latest V’Amp prototype passed testing today. Production is underway, expect them to be available in 3-4 weeks.
Sound of Shadows VC Digital Delay Barebones Packs now available via GearGAS.com!